FARGO® HDP5600 ID Card Printer/Encoder

Преглед и ключови характеристики

Принтер/енкодерът FARGO® HDP5600 е надеждно, ценово оптимизирано решение предлагащо решение за висококачествен 600 dpi печат за перфектно изглеждащи текст и графика. Това комплексно решение е перфектният избор за организации от типа на държавни организации, университети, големи здравни заведения и компании имащи нужда от всекидневен печат на голямо количество идентификационни или мултифункционални смарт карти.
С новия HDP5600 можете да печатате чисти, кристални изображения, текстове и баркод изображения – дори и стандартно трудните за печат японски или арабски символи и някои нестандартни символи от кирилицата. В допълнение трябва да споменем и факта, че HDP5600 предлага универсален модулен дизайн, позволяващ лесно добавяне на различна функционалност в случай на необходимост.

  • Висококачествен resin печат. Печата чисти, кристални изображения, текст и баркод изображения.
  • Опционален енкодер. Персонализира безпроблемно високозащитени мултифункционални контактни или безконтактни смарт карти предназначени за вашите специфични нужди – оторизация пред високозащитени системи и приложения, посетителски системи, физически и логически контрол на достъпа, системи за отчитане на работното време или вендинг карти за автомата за закуски.
  • Универсален модулен дизайн. HDP5600 е създаден да се развива съобразно вашите потребности – налични са модул за двустранен печат, ламинатор за едностранен или едновременен двустранен печат.
  • Опростен, интуитивен дизайн. Картите, консумативите и ламиниращата лента са поставени в подходящо обозначени касети позволяващи лесно и бързо обслужване. Така обслужващият персонал не се нуждае от допълнително обучение и пести от времето необходимо за зареждане на необходимите консумативи.

Само един принтер предлага 5-а генерация ретрансферна технология подходяща за всички ваши нужди – от контрастното живо изображение на вашата обикновена идентификационна карта със снимка до съвременните високозащитени мултифункционални смарт карти – HDP5600 е вашето решение за ненадминато качество, надеждност и икономичност.

Спецификации

Print Method HDP® Dye-Sublimation / Resin Thermal Transfer
Resolution Available in 600 dpi (23.6 dots/mm) or 300 dpi (11.8 dots/mm)
Colors Up to 16.7 million / 256 shades per pixel
Print Ribbon Options
  • Full-color, YMC*, 750 prints
  • Full-color with resin black, YMCK*, 500 prints
  • Full-color with two resin black panels, YMCKK*, 500 prints
  • Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH*, 500 prints
  • Full-color with resin black and inhibit panel for signature or other non-printing areas, YMCKI*, 500 prints
  • Full-color with fluorescing and resin black, YMCFK*, 500 prints
  • Full-color with two resin black and inhibit panels for signature or other non-printing areas, YMCKIKI*, 400 prints
  • Full-color in half panel format with a full resin black panel, Half Panel YMCK*, 1000 prints
  • Full-color in half panel with two full resin black panels for producing cards with full-color front and black-only back, Half Panel YMCKK*, 750 prints
  • Premium Resin Black, K*, 3000 prints
HDP Film Options
  • Clear (Approximately 1500 prints)
  • Standard Holographic (500 prints)
  • Custom Holographic, special order (500 prints)
  • High Durable HDP Film (Clear) with increased durability for producing longer life cards (Approximately 1000 prints)
Overlaminate Options
  • Thermal Transfer Overlaminate, .25 mil thick, 500 prints
  • PolyGuard™ Overlaminate, 1.0 mil and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size)

All overlaminates available in clear, standard holographic design or custom holographic design
Print Speed ** Batch Mode:

  • Up to 24 seconds per card / 150 cards per hour (YMC with transfer)*
  • Up to 29 seconds per card / 124 cards per hour (YMCK with transfer)*
  • Up to 40 seconds per card / 90 cards per hour (YMCKK with transfer)*
  • Up to 35 seconds per card / 102 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)*
  • Up to 48 seconds per card / 75 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)*
Accepted Standard Card Sizes CR-80 (3.370″L x 2.125″W / 85.6mmL x 54mmW)
Print Area Over-the-edge on CR-80 cards
Accepted Card Thickness 030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
Accepted Card Types ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards, polycarbonate.
Note: ABS and PVC cards are not recommended for use in the HDP5600 Lamination Module.***
Input Card Cartridge Capacity 100 cards (.030″ / .762mm)
Output Hopper Card Capacity 200 cards (.030″ / .762mm)
Card Cleaning Replaceable cleaning roller (included with each print ribbon)
Memory 64 MB RAM
Display User-friendly, SmartScreen™ LCD Control Panel
Software Drivers Windows 10 / 8 / 7 / Vista / XP / Server 2012 / Server 2012 R2 / Server 2008 / Server 2008 R2 / Server 2003 R2 / Server 2003 R1
Mac OS X v10.10 / v10.9 / v10.8 / v10.7 / v10.6 and Linux****
Encoding Options Supported smart card and magnetic stripe technologies:

  • 125kHz (HID Prox) reader
  • 13.56 MHz (iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder
  • Contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards
  • ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3
Supported Access Control Credential Programming iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE DESFire® EV1, HID Prox
Interface USB 2.0 (high speed) and Ethernet with internal print server
Supply Voltage 100-240 VAC, 3.8A
Supply Frequency 50 Hz / 60 Hz
Operating Temperature 65° to 90° F / 18° to 32° C
Humidity 20 – 80% non-condensing
Dimensions
  • HDP5600: 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD
  • HDP5600 + Dual-Sided Module: 11.50”H x 17.50”W x 9.25”D / 292mmH x 445mmW x 235mmD
  • HDP5600 + Single-Sided Lam Module: 12.75”H x 25”W x 9.25”D / 324mmH x 635mmW x 235mmD
  • HDP5600 + Dual-Sided Module + Dual-Sided Lam Module: 12.75”H x 30”W x 9.25”D / 324mmH x 762mmW x 235mmD
  • Lam Module: 12.75”H x 12.25”W x 9.25”D / 324mmH x 313mmW x 235mmD
Weight
  • HDP5600: 16 lbs. / 7.3 kg, HDP5000 + Dual-Sided Module: 22 lbs. / 10 kg
  • HDP5600 + Single-Sided Lam Module: 28 lbs. / 12.7 kg
  • HDP5600 + Dual-Sided Module + Dual-Sided Lam Module: 36 lbs. / 16.4 kg
Certifications ***** UL, CE, FCC
Warranty
  • Printer – Three years including one year of free printer loaner support (U.S. only); optional Extended Warranty Program (U.S. only)
  • Printhead – Lifetime; unlimited pass
FARGO Secure Materials

FARGO Card Printer/Encoders require highly specialized media to function properly. To maximize printedcard quality and durability, printhead life and printer/encoder reliability, use only FARGO Secure Materials.

FARGO warranties are void, where not prohibited by law, when non-FARGO Secure Materials are used.
Options
  • 600 dpi
  • Dual card input hopper module
  • Card lamination module – single-sided or dual-sided (simultaneous)***
  • Magnetic stripe encoding
  • 200-card input hopper
  • Smart card encoding (contact/contactless)
  • Dual-sided printing
  • Physical locks for card hoppers and consumables access
  • Printer cleaning kit • Secure proprietary consumables system
  • Custom secure holographic HDP Film and overlaminate
  • Wi-Fi® Module
Software FARGO Workbench Diagnostic Utility
  • * Indicates the ribbon type and the number of ribbon panels printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, I=Inhibit, F=Fluorescing, H=Heat Seal
  • ** Print speed indicates an approximate print speed and is measured from the time a card drops into the output hopper to the time the next card drops into the output
  • hopper. Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is dependent on the size of the file, the printhead
  • resolution, the CPU, amount of RAM and the amount of available resources at the time of the print.
  • *** ABS and PVC cards are not recommended for use in the HDP5600 Lamination Module. (Free card proofing available. Please contact your local integrator for more
  • information.)
  • ****Linux driver support availability expected Q1 2016. Linux versions: Ubuntu 10.04 / 12.04 / 14.04, Debian 6 / 7 / 8, Fedora 20 / 21 / 22, openSUSE 13.1 / 13.2
  • *****Please contact your local HID Integrator for additional certification information